Cut to lenght line
Model: Edge 1500 line - cut to lenght line
|
Characteristics Automatic lines for coil processing. Machine decoils the metal sheet of thickness from 0.4 to 3 [mm], the coil mass up to 12 000 [kg] and width up to 1.5 [m]. Configuration depends on the customer's specififcation. The line realize following processes: decoiling, straightening, optionally [slitting/hole punching], cutting to length, foiling, stacking on the conveyor belt or stationary table. Machines is also equiped with scrap reception table. Line is dedicated for the alloy steel; galvanized; stainless steel; coated or aluminum. |
Line includes:
1. Decoiler - Powered decoiler double arm - model Arm 2 or Arm3, or powered decoiler one arm Arm 1.
2. Sheet guiding module.
3. Straightening unit/ feeder - Straightener with hardened 7 shafts, scratch free, with upper
shafts individually adjustable, feeder with servo sheet precise feeder [+/-] 0.1 / 250mm feed accuracy.
4.Slitting mechanism
5. Cutting unit with electrically driven guillotine suitable for 0,4 -1 mm stainless steel, knifes
included.
6. Receiving table
7.Scrap reception mechanism
Technical specification:
| Parameter | Value |
| Coil mass |
12000 kg |
| Coil width |
min. 250 up to max. 1500 mm |
| Steel sheet thickness | min. 0,40 max. 3 mm |
| Material's characterisctics |
alloy steel; galvanized; stainless steel; coated or aluminum, Rm<750N/mm² |
| Slitting system |
Five pairs of knives |
| Precision of cut dimension | +/- 0,5 mm / 1000 mm |
| Shaft’s quantity | up to 15 hardened shafts, depending on mterial parameters, straightening may be scratch free |
| Guillotine mechanism | electrically driven guillotine, knifes included |
| Coil change-over | Half automatic method where the coil is loaded directly on the cantilevered mandrel by coil lifter the process is vcontrolled by operator. The mandrel is expanded hydraulically. |
| Efficiency | 4 workpieces with a length of 900mm / 1 min. |
| Machine commands input method |
PLC/ HMI control Start/Stop, length, set by master controller or by operator. |
| Communication interface for machine’s integration |
Network interface/ hard wired signals or mixed . |
| We offer full adaptation of the line to factorie's field layout, installation, employees training, guarantee and post guarantee service. |